
PA6 BGZ-15/2 BK EMS-CHEMIE SWITZERLAND
131
Form:Granules | Grade:Enhanced level
Properties:
Glass fiber reinforcedHigh impact resistanceFiller: Glass fiber reinf15%Filler by weight
Typical Applications:
Home appliance componentsAutomotive interior partsElectrical applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Home appliance components | Automotive interior parts | Electrical applications |
| Properties: | Glass fiber reinforced | High impact resistance | Filler: Glass fiber reinf | 15% | Filler by weight |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | kJ/m² | 75 | 90 |
| -30°C | kJ/m² | 70 | 75 | |
| Charpy Notched Impact Strength | 23°C | kJ/m² | 20 | 25 |
| -30°C | kJ/m² | 11 | 12 | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Flammability level | 0.8mm | HB | -- | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile strain | Break | % | 5.0 | 15 |
| tensile strength | Break | MPa | 110 | 65.0 |
| Tensile modulus | MPa | 5300 | 2800 | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | TD | cm/cm/°C | 1.2E-04 | -- |
| MD | cm/cm/°C | 5E-05 | -- | |
| Melting temperature | °C | 222 | -- | |
| Continuous use temperature | --4 | °C | 160 | -- |
| --3 | °C | 90.0to120 | -- | |
| Hot deformation temperature | 8.0MPa,Unannealed | °C | 55.0 | -- |
| 1.8MPa,Unannealed | °C | 190 | -- | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | Equilibrium,23°C,50%RH | % | 2.0 | -- |
| Saturation,23°C | % | 8.0 | -- | |
| Shrinkage rate | MD | % | 0.20 | -- |
| TD | % | 0.70 | -- | |
| density | g/cm³ | 1.18 | -- | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | kV/mm | 40 | 35 | |
| Volume resistivity | ohms·cm | 1E+14 | 1E+13 | |
| Surface resistivity | ohms | -- | 1E+12 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.