SEBS 755
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.05 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 18 g/10min | |
| Shrinkage rate | 0.50 % | ||
| 0.90 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD2240 | 57 |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | Break | ASTMD412 | 560 % |
| compression set | ASTMD395 | 31 % | |
| Tensile stress | ASTMD412 | 2.35 MPa | |
| tensile strength | ASTMD412 | 4.02 MPa |
| aging | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Change rate of tensile strength in air | ASTMD573 | 0.30 % | |
| Change rate of ultimate elongation in air | ASTMD573 | 7.0 % | |
| The rate of change in hardness of an air hardness tester | ASTMD573 | -3.0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | -50.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top