PA66

PA66 Grilon® TS V0 NA EMS-CHEMIE TAIWAN

Properties:
Glass fiber reinforcedThermal stability
Usages:
Automotive ApplicationsProfile
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch	-30°C	kJ/m²	70 --
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	kJ/m²	75

flammability	Test Condition	Test Method	Test Result
Flammability level	1.5mm		V-0 --
Flammability level	Flammability level	0.40mm		V-0 --
Extreme Oxygen Index		%	35 --

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		MPa	3600 1600
tensile strength	Yield	MPa	85.0 50.0
tensile strength	tensile strength	Break	MPa	75.0 50.0
Tensile strain	Yield	%	4.0
Nominal tensile fracture strain		%	10 ＞50

thermal performance	Test Condition	Test Method	Test Result
Linear coefficient of thermal expansion	TD	cm/cm/°C	9E-05 --
Hot deformation temperature	0.45MPa,Unannealed	°C	210 --
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	°C	70.0 --
Continuous use temperature	--3	°C	100to120 --
Continuous use temperature	Continuous use temperature	--4	°C	200 --
Melting temperature		°C	260 --
Linear coefficient of thermal expansion	MD	cm/cm/°C	7E-05 --

Physical properties	Test Condition	Test Method	Test Result
Shrinkage rate	TD	%	0.80 --
Shrinkage rate	Shrinkage rate	MD	%	0.70 --
Water absorption rate	Saturation,23°C	%	8.0 --
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	%	2.5 --

Electrical performance	Test Condition	Test Method	Test Result
Surface resistivity		ohms	-- 1E+10
Volume resistivity		ohms·cm	1E+13
Dielectric strength		kV/mm	28 26
Relative permittivity	100Hz		3.00 8.00
Relative permittivity	Relative permittivity	1MHz		3.00
Dissipation factor	100Hz		5E-03 0.15
Dissipation factor	Dissipation factor	1MHz		0.015 0.070
Compared to the anti leakage trace index		V	--

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top