Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTMD1238 | 8.0 g/10min |
| Shrinkage rate | | ASTMD955 | 0.30to0.50 % |
| Water absorption rate | | ASTMD570 | 0.12 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 122 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 98.1 Mpa |
| elongation | | ASTMD638 | 3.0 % |
| Flexural modulus | | ASTMD790 | 4900 Mpa |
| bending strength | | ASTMD790 | 137 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 4E+16 ohms·cm |
| dielectric strength | | ASTMD149 | 31 KV/mm |
| dielectric constant | | ASTMD150 | 3.05 |
| Dissipation Factor | | ASTMD150 | 9.7E-03 |
| arc resistance | | ASTMD495 | 120 sec |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat Deflection Temperature | | ASTMD648 | 151 °C |
| Heat Deflection Temperature | | ASTMD648 | 150 °C |
| Linear thermal expansion coefficient | | ASTMD696 | 2.3E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices