PP INELEC PPHF
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 0.978 g/cm³ | |
| Shrinkage rate | ASTMD955 | 1.3到1.8 % | |
| density | ASTMD792 | 0.978 g/cm³ | |
| Shrinkage rate | ASTMD955 | 1.3到1.8 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Break | ASTMD638 | 24.8 MPa |
| Flexural modulus | ASTMD790 | 1240 MPa | |
| bending strength | ASTMD790 | 31.7 MPa | |
| tensile strength | Break | ASTMD638 | 24.8 MPa |
| Flexural modulus | ASTMD790 | 1240 MPa | |
| bending strength | ASTMD790 | 31.7 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 480 J/m | |
| Suspended wall beam without notch impact strength | ASTMD256 | 无断裂 | |
| Impact strength of cantilever beam gap | ASTMD256 | 480 J/m | |
| Suspended wall beam without notch impact strength | ASTMD256 | 无断裂 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTMD257 | 1.0E+3到1.0E+7 ohms | |
| ASTMD257 | 1.0E+3到1.0E+7 ohms |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top