EVA TN 2020 BRASKEM BRAZIL

Form：Granules | Grade：Transparent level

Properties:

Thermal stabilitydimensional stability High transparencyFood contact compliance

Typical Applications:

filmFood packagingFood service sectorLaminateLaminateFood packaging

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	film \| Food packaging \| Food service sector \| Laminate \| Laminate \| Food packaging
Properties:	Thermal stability \| dimensional stability \| High transparency \| Food contact compliance

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
turbidity	50.0μm,Blown Film	ASTM D1003	1.8	%
gloss	60°,50.0μm,Blown Film	ASTM D2457	140
gloss	gloss	45°,50.0μm,Blown Film	ASTM D2457	86
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
elongation	Break,Compression Molded	ASTM D638	700	%
tensile strength	Break,Compression Molded	ASTM D638	19.0	Mpa
tensile strength	tensile strength	Yield,Compression Molded	ASTM D638	7.00	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature			100	°C
Vicat softening temperature		ASTM D1525	79.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Vinyl acetate content			8.0to9.0	wt%
melt mass-flow rate	190°C/2.16kg	ASTM D1238	2.0	g/10min
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA,Compression Molded	ASTM D2240	85
film	Test Condition	Test Method	Test Result	Test Unit
elongation	TD:Break,50μm,Blown Film	ASTM D882	730	%
elongation	elongation	MD:Break,50μm,Blown Film	ASTM D882	490	%
tensile strength	TD:Break,50μm,Blown Film	ASTM D882	22.0	Mpa
tensile strength	tensile strength	MD:Break,50μm,Blown Film	ASTM D882	25.0	Mpa
Secant modulus	5%Secant,TD:50μm,Blown Film	ASTM D882	64.0	Mpa
Secant modulus	Secant modulus	5%Secant,MD:50μm,Blown Film	ASTM D882	67.0	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top