Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.50 g/cm³ |
| Shrinkage rate | | | 0.80 % |
| Shrinkage rate | | | 0.50 % |
| Water absorption rate | Saturation | ASTMD570 | 0.10 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | | GB/T1040 | 80.0 MPa |
| Tensile strain | Break | GB/T1040 | 12 % |
| Bending stress | | GB/T1042 | 120 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | GB/T1043 | 130 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dissipation Factor | | GB/T1409 | 0.020 |
| Surface Resistivity | | GB/T1410 | 5E+14 ohms |
| Volume resistivity | | GB/T1410 | 3E+13 ohms·cm |
| dielectric strength | | ASTMD149 | 15 kV/mm |
| dielectric constant | | GB/T1409 | 3.50 |
| dielectric constant | | GB/T1409 | 3.50 |
| Dissipation Factor | | GB/T1409 | 0.020 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | GB/T1634 | 110 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare