PLA+PBS Eco-Solutions GP330-S
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 1.1 % | |
| density | ASTM D792 | 1.43 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 14to18 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 88 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 2270 MPa | |
| tensile strength | Break | ASTM D638 | 35.1 MPa |
| elongation | Break | ASTM D638 | 7.4 % |
| Flexural modulus | ASTM D790 | 1480 MPa | |
| bending strength | Yield | ASTM D790 | 50.3 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 49 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 88.3 °C | |
| melting temperature | 113 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top