APPEEL 20D828
766
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 13 g/10 min |
| squeeze out | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 55 °C | ||
| drying time | 5.0 hr | ||
| Temperature in Zone 1 of the material cylinder | 160 °C | ||
| Temperature in Zone 2 of the material cylinder | 185 °C | ||
| Temperature in Zone 3 of the material cylinder | 210 °C | ||
| Temperature in Zone 4 of the material cylinder | 235 °C | ||
| Temperature in Zone 5 of the material cylinder | 235 °C | ||
| Joint temperature | 235 °C | ||
| Melt Temperature | 180 to 240 °C | ||
| die temperature | 235 °C |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D1525 | 58.0 °C | |
| melting temperature | ASTM D3418 | 97.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top