PEEK INLUBE PEEKCF30TF15 USA Infinity LTL

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Suspended wall beam without notch impact strength	3.18mm	ASTM D256	430	J/m
Impact strength of cantilever beam gap	3.18mm	ASTM D256	80	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.6mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		ASTM D790	345	MPa
Bending modulus		ASTM D790	25500	MPa
elongation	Yield	ASTM D638	1.0to2.0	%
tensile strength	Yield	ASTM D638	228	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD	ASTM D696	1.4E-05	cm/cm/°C
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	316	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.50	g/cm³
Water absorption rate	24hr	ASTM D570	0.10	%
Shrinkage rate	MD	ASTM D955	0.10to0.15	%
Specific volume			0.667	cm³/g
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257	1.0E+2到1.0E+6	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	124

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top