Share
Add to compare

Epoxy OE101 Epoxy Technology Inc.

Typical Applications:
Electrical and electronic application fields
Product Description
Certificates(0)
Datasheet

Product Description

Typical Applications:Electrical and electronic application fields

Certificates

No Data...

Technical Data Sheet

Cured PropertiesTest ConditionTest MethodTest ResultTest Unit
LapShearStrength23°C>13.8MPa
Shore hardnessShoreD82
Relative permittivity1kHz3.22
Volume resistivity23°C>1.5E+13ohms·cm
Dissipation factor1kHz3.6E-03
Uncured PropertiesTest ConditionTest MethodTest ResultTest Unit
Color--6Amber
Color--7Transparent.LightYellow
densityPartB1.02g/cm³
densityPartA1.16g/cm³
density粘度8(23°C)1.5to2.5Pa·s
density固化时间(150°C)1.0hr
densityPot Life240min
optical performanceTest ConditionTest MethodTest ResultTest Unit
Refractive index1.546
transmissivity400nm>50.0%
transmissivity600nm>92.0%
transmissivity675nm>97.0%
thermosettingTest ConditionTest MethodTest ResultTest Unit
Thermosetting componentsPartA按重量计算的混合比:10
Thermosetting componentsPartB按重量计算的混合比:1.0
Thermosetting componentsShelf Life(23°C)52wk
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Glass transition temperature>65.0°C
Linear coefficient of thermal expansionMD:--34.1E-05cm/cm/°C
Linear coefficient of thermal expansionMD:--42.1E-04cm/cm/°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Ionic typeK+7ppm
Ionic typeNa+6ppm
Ionic typeNH4+171ppm
Supplementary InformationTest ConditionTest MethodTest ResultTest Unit
weight loss on heating300°C1.2%
weight loss on heating250°C0.82%
DegradationTemperature456°C
Shear Strength23°C35.2MPa
operate temperatureContinuous-55-200°C
operate temperatureIntermittent-55-300°C
operate temperatureStorageModulus(23°C)2.47GPa
weight loss on heating200°C0.60%
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.