COC ZEONEX® F52R ZEON JAPAN
40
- Properties:Ozone resistantLow tenderness
- Usages:Automotive Applicationspipeline
- Certificates:UL
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Refractive index | ASTM D542 | 1.535 | |
| transmissivity | 3000μm | ASTM D1003 | 92.0 % |
| Transmittance rate | ASTM D1003/ISO 13468 | 92% % | |
| Refractive index | ASTM D542/ISO 489 | 1.535 |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| remarks | 光学镜片 | ||
| characteristic | 高折射率 耐环境性能 | ||
| Color | 透明 | ||
| purpose | 光学镜头 光学镜片 |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 2500 Mpa | |
| tensile strength | ISO 527-2 | 45.0 Mpa | |
| Tensile strain | Break | ISO 527-2 | 2.0 % |
| Bending modulus | ISO 178 | 2500 Mpa | |
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 19 kg·cm/cm(J/M)ft·lb/in | |
| elongation | ASTM D638/ISO 527 | 2 % | |
| Bending modulus | ASTM D790/ISO 178 | 2400 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 109 kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ASTM D638/ISO 527 | 45 kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ASTM D638/ISO 527 | 3000 kg/cm²(MPa)[Lb/in²] |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Glass transition temperature | JISK7121 | 156 °C | |
| Linear coefficient of thermal expansion | MD | ASTME831 | 6E-05 cm/cm/°C |
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 156 ℃(℉) |
| HDT | ASTM D648/ISO 75 | 144 ℃(℉) | |
| Combustibility (rate) | UL 94 | HB |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 280°C/2.16kg | JISK6719 | 22 g/10min |
| Water absorption rate | Equilibrium | ASTM D570 | <0.010 % |
| density | ASTM D792/ISO 1183 | 1.02 | |
| Water absorption rate | ASTM D570/ISO 62 | <0.01 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
