Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.59 g/cm³ |
| Water absorption rate | | ISO62 | 0.30 % |
| Water absorption rate | | ISO62 | 0.15 % |
| density | | ASTMD792 | 1.59 g/cm³ |
| Water absorption rate | | ISO62 | 0.30 % |
| Water absorption rate | | ISO62 | 0.15 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| UL flame retardant rating | | UL94 | V-0 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256A | 57 J/m |
| Impact strength of cantilever beam gap | | ASTMD256A | 57 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Break | ASTMD638 | 100 MPa |
| elongation | Break | ASTMD638 | 4.0 % |
| bending strength | | ASTMD790 | 162 MPa |
| tensile strength | Break | ASTMD638 | 100 MPa |
| elongation | Break | ASTMD638 | 4.0 % |
| bending strength | | ASTMD790 | 162 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC60093 | 1.5E+16 ohms·cm |
| Volume resistivity | | IEC60093 | 1.5E+16 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 210 °C |
| | ASTMD648 | 195 °C |
| | ASTMD648 | 210 °C |
| | ASTMD648 | 195 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare