ABS GP-35 INEOS STYRO KOREA

Form：Granules | Grade：High liquidity level

Properties:

High impact resistanceHigh mobility

Typical Applications:

Electronic communication accessoriesHousehold appliances

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electronic communication accessories \| Household appliances
Properties:	High impact resistance \| High mobility

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
Huangdu Index		DIN 6167	15	YI
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	90	kJ/m²
Impact strength of cantilever beam gap	23°C	ISO 180/1A	22	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-30°C	ISO 180/1A	7	kJ/m²
Elongation at Break	23°C	ISO 527-2	2.4	%
Tensile modulus	23°C	ISO 527-2	2300	Mpa
bending strength	23°C	ISO 178	65	Mpa
Charpy Notched Impact Strength	23°C	ISO 179/1eA	19	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30°C	ISO 179/1eA	7	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	130	kJ/m²
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPaAnnealed	ISO 75-2/B	95	°C
Hot deformation temperature	Hot deformation temperature	1.80MPaAnnealed	ISO 75-2/A	92	°C
Vicat softening temperature		ISO 306/A50	102	°C
Vicat softening temperature	Vicat softening temperature		ISO 306/B50	95	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	8E-05	cm/cm/°C
	Linear coefficient of thermal expansion	TD	ISO 11359-2	1.1E-04	cm/cm/°C
	Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	导热系数	DIN 52612	0.17	W/m/K
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD2.0mm	ISO 294-4	0.55	%
Water absorption rate	(23°C,24hr)	ISO 62	0.95	%
Water absorption rate	Water absorption rate	(23°C,50RH)	ISO 62	0.24	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	1E+15	Ω.cm
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test		ISO 2039-1	99	Mpa
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL -94	HB	0.80mm
	UL flame retardant rating		UL -94	HB	1.50mm
	UL flame retardant rating	UL flame retardant rating		UL -94	HB	3.00mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top