Polyester, TP DuraStar™ DS2010
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.20 g/cm³ | |
| ISO1183 | 1.19 g/cm³ | ||
| Shrinkage rate | ASTMD955 | 0.20to0.60 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTMD785 | 105 |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| transmissivity | ASTMD1003 | 91.0 % | |
| ASTMD1003 | 89.0 % | ||
| Haze ratio | ASTMD1003 | 0.30 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| FlameRating | UL94 | V-2 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strain | ISO527-2 | 4.0 % | |
| elongation | ASTMD638 | 310 % | |
| Tensile strain | ISO527-2 | 210 % | |
| Tensile stress | ISO527-2 | 47.0 MPa | |
| tensile strength | ASTMD638 | 53.0 MPa | |
| Tensile stress | ISO527-2 | 49.0 MPa | |
| elongation | ASTMD638 | 5.0 % | |
| tensile strength | ASTMD638 | 46.0 MPa | |
| Flexural modulus | ASTMD790 | 1900 MPa | |
| ISO178 | 1750 MPa | ||
| Bending stress | ISO178 | 64.0 MPa | |
| bending strength | ASTMD790 | 67.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dart impact equipped with measuring instruments | ASTMD3763 | 48.0 J | |
| ASTMD3763 | 45.0 J | ||
| Impact strength of cantilever beam gap | ASTMD256 | 60 J/m | |
| ASTMD256 | 370 J/m | ||
| ISO180 | 6.3 kJ/m² | ||
| ISO180 | 30 kJ/m² | ||
| ASTMD4812 | NoBreak | ||
| ASTMD4812 | NoBreak | ||
| Multi axis Instrumented Impact Energy | ISO6603-2 | 55.0 J | |
| ISO6603-2 | 71.0 J |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTMD257 | 1E+17 ohms·cm | |
| dielectric strength | ASTMD149 | 17 kV/mm | |
| dielectric constant | ASTMD150 | 2.60 | |
| ASTMD150 | 2.60 | ||
| ASTMD150 | 2.50 | ||
| ASTMD150 | 2.50 | ||
| Dissipation Factor | ASTMD150 | 6E-03 | |
| arc resistance | ASTMD495 | 123 sec | |
| CTI | ASTMD3638 | 700 V | |
| Dissipation Factor | ASTMD150 | 0.012 | |
| ASTMD150 | 0.015 | ||
| ASTMD150 | 0.015 | ||
| Surface Resistivity | ASTMD257 | 1E+17 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 73.0 °C | ||
| ISO75-2/B | 73.0 °C | ||
| ASTMD648 | 65.0 °C | ||
| ISO75-2/A | 66.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top