ETPU ISOPLAST™ 101 ETPU
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.40to0.60 % | |
| Water absorption rate | ASTM D570 | 0.17 % | |
| density | ASTM D792 | 1.19 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTM D785 | 116 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTM D638 | 48.0 MPa |
| Break | ASTM D638 | 48.0 MPa | |
| elongation | Yield | ASTM D638 | 6.0 % |
| Tensile modulus | ASTM D638 | 1500 MPa | |
| elongation | Break | ASTM D638 | 160 % |
| Flexural modulus | ASTM D790 | 1800 MPa | |
| bending strength | ASTM D790 | 68.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dart impact | ASTM D3763 | 68.0 J | |
| Impact strength of cantilever beam gap | ASTM D256 | 160 J/m | |
| ASTM D256 | 1300 J/m | ||
| ASTM D256 | 1100 J/m | ||
| Dart impact | ASTM D3763 | 68.0 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 71.0 °C | |
| ASTM D648 | 82.0 °C | ||
| ASTM D648 | 60.0 °C | ||
| ASTM D648 | 77.0 °C | ||
| vicat | ASTM D1525 | 89.0 °C | |
| Linear coefficient of thermal expansion | ASTM D696 | 8.1E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top