LDPE 959S STYRON US
8
- Properties:Product trademark DOW
- Usages:For injection molding grade
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 0.921 g/cm | |
| melt mass-flow rate | ASTM D-1238 | 55 g/10min |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Environmental stress cracking resistance | ASTM D-1693 | 1.00 hr | |
| DTUL | ASTM D-648 | 46.1 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Yield tensile strength | ASTM D-638 | 11.0 Mpa | |
| Tensile strength at break | ASTM D-638 | 6.21 Mpa | |
| elongation at yield | ASTM D-638 | 3.0 % | |
| elongation | ASTM D-638 | 58 % | |
| Flexural modulus | ASTM D-790 | 331 Mpa | |
| Tensile impact strength | ASTM D-1822 | 118 KJ/m | |
| hardness | ASTM D-2240 | 48 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting point | DSC | 110 °C | |
| Crystal point | ASTM D-3418 | 100 °C | |
| brittle temperature | ASTM D-746 | -20.0 °C | |
| vicat | ASTM D-1525 | 90.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top