Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ASTMD570 | 0.032 % |
| density | | ASTMD792 | 1.48 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | R-Scale | ASTMD785 | 114 |
| | ASTMD2240 | 82 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| LossIndex | | ASTMD150 | 0.0510 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 2760 MPa |
| tensile strength | | ASTMD638 | 51.0 MPa |
| elongation | Yield | ASTMD638 | 3.5 % |
| elongation | Break | ASTMD638 | 130 % |
| Flexural modulus | | ASTMD790 | 2900 MPa |
| bending strength | | ASTMD790 | 82.7 MPa |
| compressive strength | | ASTMD695 | 74.7 MPa |
| shear strength | | ASTMD732 | 63.7 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 53到160 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 1.5E+14 ohms·cm |
| dielectric strength | | ASTMD149 | 22 kV/mm |
| dielectric constant | | ASTMD150 | 2.91 |
| Dissipation Factor | | ASTMD150 | 0.018 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| specific heat | | ASTMC351 | 837 J/kg/°C |
| thermal conductivity | | ASTMC177 | 0.10 W/m/K |
| | ASTMD648 | 68.9 °C |
| vicat | | ASTMD1525 | 34.4 °C |
| | ASTMD696 | 5.3E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare