PA6 C216-V15 SOLVAY SHANGHAI

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforced

Typical Applications:

Automotive sectorElectronic fieldElectrical field

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Electronic field \| Electrical field
Properties:	Glass fiber reinforced

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	---	ISO 180	5	kJ/m²
Elongation at Break	---	ISO 527	4	%
Charpy Notched Impact Strength	---	ISO 179-1993	5.5	kJ/m²
Elongation at Break	---	ISO 527	120	Mpa
Impact strength of simply supported beam without notch	---	ISO 179-1993	42	kJ/m²
Tensile modulus	---	ISO 527	6100	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa	ISO 179-1993	180	°C
Combustibility	1.6mm	ISO 1210UL 94	HB	V
Glow wire combustion index (GWFI)	1.6mm	IEC 695-2-1	650	°C
Melting temperature	---	ISO 3146C	222	°C
Linear coefficient of thermal expansion	23℃-85℃	ISO 75-2	4.2	E-5/℃
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	在23℃，24hr	ISO 62	1.15	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity	---	IEC 93	10	E14.ohm.cm
Compared to the Leakage Traceability Index (CTI)	---	IEC 112	550	V
Surface resistivity	---	IEC 93	0.1	E14.ohm
Dielectric constant	1MHz	IEC 250	3.8	---
Dielectric loss	1MHz	IEC 250	0.02	---

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top