PMMA CP-10001 Lucite (Taiwan)

Properties:
Electrical insulation
good chemical corrosion resistance
good impact resistance
good processing performance
good dimensional stability
good weather resistance
high clarity
high flow rate
low to odorless
low to tasteless
processable
Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ASTM D792	1.16 g/cm
Shrinkage rate	ASTM D955	0.6 %
Rockwell hardness	ASTM D785	36

optical performance	Test Method	Test Result
refractive index	ASTM D542	1.49
transmittance	ASTM D1003	91 %
Haze ratio	ASTM D1003	2 %

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D1238	2.7 g/10min
Water absorption rate		ASTM D570	0.3 %

Mechanical properties	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	64.1 J/m
Suspended wall beam without notch impact strength		ASTM D256	993 J/m
Dart impact		ASTM D3029	5.88 J
Tensile modulus		ASTM D638	1860 MPa
tensile strength		ASTM D638	42.1 MPa
elongation	Break	ASTM D638	37 %
Flexural modulus		ASTM D790	1790 MPa
bending strength		ASTM D790	61.4 MPa

Thermal performance	Test Method	Test Result
Heat distortion temperature	ASTM D648	82.2 ℃
vicat	ASTM D1525	99.4 ℃
Linear coefficient of thermal expansion	ASTM D696	0.000081 cm/cm/℃
UL flame retardant rating	UL 94	HB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top