
PPS 1150A64 JAPAN POLYPLASTIC
Form:Granules | Grade:Flame retardant grade
Properties:
Low warpageGlass fiber reinforcedFlame retardant
Typical Applications:
Fiber grade
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Fiber grade |
| Properties: | Low warpage | Glass fiber reinforced | Flame retardant |
Certificates

Technical Data Sheet
| machinability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Shrinkage rate | Flow,80℃×2mmt | 0.4 | % | |
| Across Flow,80℃×2mmt | 0.6 | % | ||
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| density | ISO 1183 | 1.75 | ||
| Water absorption rate | 23℃,水中24hr | ISO 62 | 0.01 | % |
| Melt viscosity | 310℃、1000/sec | ISO 11443 | 260 | Pa·s |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | ISO 527-1 | 145 | Mpa | |
| Bending modulus | ISO 178 | 16000 | Mpa | |
| Fracture strain | ISO 527-1 | 1.2 | % | |
| Charpy Notched Impact Strength | ISO 179/1eA | 5.0 | KJ/m | |
| bending strength | ISO 178 | 215 | Mpa | |
| tensile strength | ASTM D638/ISO 527 | 145 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus | ASTM D790/ISO 178 | 16000 | kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 215 | kg/cm²(MPa)[Lb/in²] | |
| Elongation at Break | ASTM D638/ISO 527 | 1.2 | % | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | Flow | ISO 11359-2 | 2 | |
| Across Flow | 3 | |||
| Hot deformation temperature | 1.8MPa | ISO 75-1 | 270 | °C |
| Combustibility (rate) | UL 94 | V-0 | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792/ISO 1183 | 1.75 | ||
| Water absorption rate | ASTM D570/ISO 62 | 0.01 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | IEC 60093 | 3×10 | Ω | |
| Dielectric strength | 1KHz | IEC 60250 | 0.002 | |
| Dielectric loss | 3mmt | IEC 60243-1 | 16 | KV/mm |
| Leakage Tracking Index (CTI) | IEC 60112 | 125 | V | |
| Volume resistivity | IEC 60093 | 2×10 | Ω·cm | |
| Dielectric strength | 1MHz | IEC 60250 | 0.003 | |
| Dielectric constant | 1MHz | IEC 60250 | 4.7 | |
| 1KHz | IEC 60250 | 4.6 | ||
| Volume resistivity | ASTM D257/IEC 60093 | 2.0 x 10^16 | Ω.cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.