Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.61 g/cm³ |
| density | | ISO1183 | 1.61 g/cm³ |
| melt mass-flow rate | | ASTMD1238,ISO1133 | 25 g/10min |
| Shrinkage rate | | ASTMD955 | 0.30到0.60 % |
| Shrinkage rate | | ISO294-4 | 0.30到0.60 % |
| Water absorption rate | | ASTMD570 | 0.080 % |
| Water absorption rate | | ISO62 | 0.080 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| elongation | Break | ISO527-2/5 | 2.0 % |
| tensile strength | | ASTMD638 | 120 MPa |
| tensile strength | | ISO527-2/5 | 120 MPa |
| elongation | | ASTMD638 | 1.9 % |
| Flexural modulus | | ASTMD790 | 9500 MPa |
| Flexural modulus | | ISO178 | 9800 MPa |
| bending strength | | ASTMD790 | 180 MPa |
| bending strength | | ISO178 | 186 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 75 J/m |
| Impact strength of cantilever beam gap | | ISO180/1A | 7.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| CTI | | IEC60112 | 175 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat Deflection Temperature | | ASTMD648,ISO75-2/Af | 200 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare