HDPE PETILEN S 00356 PETKIM Petrokimya Holding A.S.
0
- Usages:Blow molding applicationsdrumscontainers
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D1505 | 0.950to0.955 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 0.020to0.060 g/10min | |
| Environmental stress cracking resistance | ASTM D1693 | >600 hr |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTM D638 | 24.0 MPa |
| Break | ASTM D638 | 36.0 MPa | |
| elongation | Break | ASTM D638 | 830 % |
| Flexural modulus | ISO 178 | 820 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 660 J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top