Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.24 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 6.5 g/10min |
| Shrinkage rate | | ASTMD955 | 0.70 % |
| Water absorption rate | | ASTMD570 | 0.30 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 850 °C |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 875 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 850 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 2480 Mpa |
| tensile strength | | ASTMD638 | 70.3 Mpa |
| elongation | | ASTMD638 | 50to100 % |
| Flexural modulus | | ASTMD790 | 2690 Mpa |
| bending strength | | ASTMD790 | 106 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 69 J/m |
| Tensile impact strength | | ASTMD1822 | 420 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dissipation Factor | | ASTMD150 | 6E-03 |
| Volume resistivity | | ASTMD257 | 3E+16 ohms·cm |
| dielectric strength | | ASTMD149 | 17 KV/mm |
| dielectric constant | | ASTMD150 | 3.03 |
| dielectric constant | | ASTMD150 | 3.04 |
| dielectric constant | | ASTMD150 | 3.02 |
| Dissipation Factor | | ASTMD150 | 7E-04 |
| Dissipation Factor | | ASTMD150 | 1E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat Deflection Temperature | | ASTMD648 | 174 °C |
| Linear thermal expansion coefficient | | ASTMD696 | 5.6E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices