PC LEXAN™ 143R-111 SABIC EU
58
- Properties:UV resistanceWeather resistanceLow viscosity
- Usages:filmWire and cable
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D-955 | 0.5-0.7 % | |
| Water absorption rate | ASTM D-570 | 0.15 % | |
| melt mass-flow rate | ASTM D1238 | 11 g/10min | |
| Water absorption rate | ASTM D570 | 0.35 % | |
| ASTM D570 | 0.58 % |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Limiting Oxygen Index | ASTM D2863 | 25 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | GEPJ | 220 % | |
| Impact strength of cantilever beam gap | ASTM D256 | 15.0 ft-lb/in | |
| Suspended wall beam without notch impact strength | ASTM D4812 | 60.0 ft-lb/in | |
| Rockwell hardness | ASTM D648 | 118 R | |
| ASTM D648 | 70 M | ||
| Impact strength of cantilever beam gap | ASTM D-256 | 764 J/m | |
| bending strength | ASTM D-790 | 93.2 Mpa | |
| Flexural modulus | ASTM D-790 | 2200 Mpa | |
| tensile strength | GEPJ | 62.8 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 10 Ω | |
| Dissipation Factor | ASTM D-150 | 0.0009 | |
| dielectric constant | ASTM D-150 | 3.2 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 132 | |
| vicat | ASTM D1525 | 310 ℉ | |
| Linear coefficient of thermal expansion | TMA | 7 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top