EPDM POLIGOM GO/10 CROSSPOLIMERI ITALY

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	IEC 60811	>10.0	MPa
Tensile strain	Break	IEC 60811	>300	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
thermosetting	200°C	IEC 60811	<100	%
thermosetting	thermosetting	Residual:200°C	IEC 60811	<25	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	0.950	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		BS6622	1E+16	ohms·cm
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA	ASTM D2240	82
aging	Test Condition	Test Method	Test Result	Test Unit
Change rate of tensile strength in air	70°C,240hr	IEC 60811	<15	%
Tensile stress change rate	70°C,240hr，Break	IEC 60811	<15	%
Change rate of tensile strength in air	100°C,24hr,在IRM902油中	IEC 60811	-8.0	%
	Change rate of tensile strength in air	100°C,24hr,在柴油中2	ISO 1817	-29	%
	Change rate of tensile strength in air	Change rate of tensile strength in air	100°C,70hr,在SAE20油中	IEC 60811	<30	%
Tensile stress change rate	100°C,24hr,在2.5％洗涤剂中（汰渍）2，Break	ISO 1817	-48	%
	Tensile stress change rate	100°C,24hr,在IRM902油中，Break	IEC 60811	-17	%
	Tensile stress change rate	Tensile stress change rate	100°C,70hr,在SAE20油中，Break	IEC 60811	<30	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top