PETG Eastar™ Z6004
496
- Properties:High mobilityImpact strength higher tHas high liquidityImpact strength higher tHas high liquidity
- Usages:Food service sectorProducts designed with K adhesiveSmall or point water outletProducts designed with K adhesiveSmall or point water outlet
- Certificates:UL
Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|---|---|---|
density | ASTM D-792 | 1.19 g/cm | |
Haze ratio | ASTM D-1003 | 0.3 % | |
Shrinkage rate | ASTM D-955 | 0.002-0.006 in/in | |
transmittance | ASTM D-1003 | 91 % |
Basic performance | Test Condition | Test Method | Test Result |
---|---|---|---|
melt mass-flow rate | 22.5 g/10min |
Mechanical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
Flexural modulus | ASTM D-790 | 2.9×105 psi | |
Tensile stress | ASTM D-638 | 7100/7500 psi | |
Impact strength of cantilever beam gap | ASTM D-256 | 1.5/0.8 ft-lb/in | |
Rockwell hardness | ASTM D-785 | 107 R | |
elongation at break | ASTM D-638 | 5/300 % | |
tensile strength | ASTM D-790 | 10000 psi |
Other performance | Test Condition | Test Method | Test Result |
---|---|---|---|
intrinsic viscosity | 0.62 |
Thermal performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Heat distortion temperature | ASTM D-648 | 70/65 °C | |
vicat | ASTM D-1525 | 85 °C | |
Heat distortion temperature | ASTM D-648 | 65 °C | |
combustibility | UL 94 | V-2 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top