Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD1505 | 0.921 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 1.0 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| transparency | | ASTMD1746 | 63.0 |
| Haze ratio | | ASTMD1003 | 15 % |
| gloss | | ASTMD2457 | 60 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Blocking-BlownFilm | | ASTMD3354 | 65.0 g/100cm² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Blown Film | ASTMD1894 | 0.11 |
| film | Test Condition | Test Method | Test Result |
|---|
| Film thickness - tested | | | 30 µm |
| tensile strength | | ASTMD882 | 50.0 MPa |
| tensile strength | | ASTMD882 | 24.0 MPa |
| elongation | | ASTMD882 | 700 % |
| elongation | | ASTMD882 | 850 % |
| Falling hammer impact | | ASTMD1709 | 100 g |
| ElmendorfTearStrength | | ASTMD1922 | 24.5 kN/m |
| ElmendorfTearStrength | | ASTMD1922 | 196.1 kN/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| vicat | | ASTMD1525 | 104 °C |
| brittle temperature | | ASTMD746 | <-70.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare