Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D1505 | <1.45 g/cm³ |
| density | | ASTM D1505 | <1.45 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | Shore A | ASTM D2240 | <80 |
| Shore hardness | Shore A | ASTM D2240 | <80 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTM D2863 | >30 % |
| Limiting Oxygen Index | | ASTM D2863 | >30 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| weight loss on heating | | | <23 g/m² |
| weight loss on heating | | | <23 g/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | >15.0 MPa |
| elongation | Break | ASTM D638 | >180 % |
| elongation | | ASTM D638 | >310 % |
| tensile strength | | ASTM D638 | >15.0 MPa |
| elongation | Break | ASTM D638 | >180 % |
| elongation | | ASTM D638 | >310 % |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of tensile strength in air | | ASTM D471 | <20 % |
| Change rate of ultimate elongation in air | | ASTM D471 | <20 % |
| Change rate of tensile strength in air | | ASTM D471 | <20 % |
| Change rate of ultimate elongation in air | | ASTM D471 | <20 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | >1.0E+10 ohms·cm |
| dielectric strength | | ASTM D149 | >18 kV/mm |
| Volume resistivity | | ASTM D257 | >1.0E+10 ohms·cm |
| dielectric strength | | ASTM D149 | >18 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| thermal stability | | | >50 min |
| LowTemperatureBritleness | | | -20 °C |
| Heat distortion temperature | | | <50 % |
| thermal stability | | | >50 min |
| LowTemperatureBritleness | | | -20 °C |
| Heat distortion temperature | | | <50 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare