HDPE DMDA-8007 Zhongyuan Petrochemical

Properties:
Characteristics
good solvent resistance
resistance to steam penetration and environmental stress cracking
good plasticity
short injection molding cycle
Usages:
Suitable for making turnover boxes
various injection molded parts
water towers
pallets
food trays
etc
Compare

Technical Data Sheet

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate			优级｜0.8±0.02 g/10min
	melt mass-flow rate			一级｜0.8±0.02 g/10min
	melt mass-flow rate	melt mass-flow rate			合格｜0.8±0.04 g/10min
density			优级｜0.920±0.001 g/cm3
	density			合格｜0.920±0.004 g/cm3
	density	density			一级｜0.920±0.002 g/cm3

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength			优级｜≥11 MPa
	tensile strength			一级｜≥10 MPa
	tensile strength	tensile strength			合格｜≥9 MPa
elongation at break			优级｜≥400 %
	elongation at break			一级｜≥350 %
	elongation at break	elongation at break			合格｜≥300 %
tensile strength			优级｜≥14 MPa
	tensile strength			一级｜≥13 MPa
	tensile strength	tensile strength			合格｜≥12 MPa

Other performance	Test Condition	Test Method	Test Result
cleanliness			优级｜≤10 个/kg
	cleanliness			一级｜≤20 个/kg
	cleanliness	cleanliness			合格｜≤40 个/kg

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top