PPO WCD8012 BK1066 SABIC INNOVATIVE NANSHA

Form：Granules | Grade：Injection grade

Properties:

Non enhancedLow odor

Typical Applications:

Electronic and Electrical ApplicationsAutomotive components

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electronic and Electrical Applications \| Automotive components
Properties:	Non enhanced \| Low odor

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
Burning wire flammability index	3.00mm	IEC 60695-2-12	850	°C
Hot filament ignition temperature	3.00mm	IEC 60695-2-13	825	°C
Extreme Oxygen Index		ISO 4589-2	27	%
VW		CCP METHOD	Pass
Smoke density	Flame,0.5mmplaque,Ds,max	ASTME662	110
Smoke density	Smoke density	Non-Flame,0.5mmplaque,Ds,max	ASTME662	47
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
crack		ASTM D638	16.0	Mpa
Fracture, 136 ° C		CCP METHOD	22.0	Mpa
crack		ISO 527-2/50	16.0	Mpa
	crack		CCP METHOD	310	%
	crack	crack		ASTM D638	260	%
Fracture, 136 ° C		CCP METHOD	250	%
crack		ISO 527-2/50	250	%
100mm span	100mm	ASTM D790	65.0	Mpa
crack		CCP METHOD	23.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Brittle temperature		ASTM D746	<-40.0	°C
Hot deformation temperature	121°C	CCP METHOD	5.0	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	250°C/10.0kg	ASTM D1238	16	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	1.9E+16	ohms·cm
Dielectric strength	2.00mm,in Oil	IEC 60243-1	25	KV/mm
Dielectric constant	1MHz	ASTM D150	2.40
Dissipation factor	1MHz	ASTM D150	7E-03
Compared to the anti leakage trace index		IEC 60112	PLC 0
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA,30Sec	ASTM D2240	85

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top