HDPE BL3 ARPC IRAN

Form：Granules | Grade：Thin film grade

Properties:

High rigidityResistance to stress cracHigh impact resistanceWide molecular weight disHigh mobilityFood contact complianceHigh rigidityGood liquidityGood impact strengthGood resistance to stress

Typical Applications:

Blow molding applicationssheetcontainerContainer with a capacity of 10L

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Blow molding applications \| sheet \| container \| Container with a capacity of 10L
Properties:	High rigidity \| Resistance to stress crac \| High impact resistance \| Wide molecular weight dis \| High mobility \| Food contact compliance \| High rigidity \| Good liquidity \| Good impact strength \| Good resistance to stress

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Huangdu Index		DIN 6167	Max.4
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		DIN 53479	0.945±0.002	gr/ml
melt mass-flow rate	190℃/5kg	DIN 53735	1±0.3	ISO -179/1eU
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Environmental stress cracking resistance	70℃，0.5bar	hr	Hoechst HDPE 19	Min.2
Impact strength of cantilever beam gap		DIN 53453	Min.6.5	mj/mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top