Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.39 g/cm³ |
| melt mass-flow rate | | ISO 1133 | 16 g/10min |
| Shrinkage rate | | 内部方法 | 2.0 % |
| Water absorption rate | | ISO 62 | 0.20 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ISO 178 | 79.0 MPa |
| Tensile modulus | | ISO 527-2 | 2500 MPa |
| tensile strength | | ISO 527-2 | 58.0 MPa |
| Tensile strain | Yield | ISO 527-2 | 10 % |
| Tensile strain | Break | ISO 527-2 | 33 % |
| Flexural modulus | | ISO 178 | 2350 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179/1eA | 5.0 kJ/m² |
| Charpy Notched Impact Strength | | ISO 179/1eA | 7.5 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC 60093 | 1E+16 ohms |
| Volume resistivity | | IEC 60093 | 1E+14 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Linear coefficient of thermal expansion | | ISO 11359-2 | 1.3E-04 cm/cm/°C |
| Heat distortion temperature | | ISO 75-2/A | 89.0 °C |
| melting temperature | | ISO 11357-3 | 165 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare