PC IUPILON™ H-2000VUR MITSUBISHI GAS SHANGHAI

Properties:
Easy to demould
Weather resistance
High mobility
Photostability
Usages:
Optical lenses
Household appliances
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
melt mass-flow rate		ISO1133	22 g/10min
Melt volume flow rate		ISO1133	20.0 cm3/10min
Shrinkage rate			0.50to0.70 %
	Shrinkage rate			0.50to0.70 %
	Shrinkage rate	Shrinkage rate			0.24 %

Mechanical properties	Test Method	Test Result
Flexural modulus	ISO178	2300 Mpa
Bending stress	ISO178	93.0 Mpa
Tensile modulus	ISO527-2	2400 Mpa
Tensile stress	ISO527-2	62.0 Mpa
Tensile strain	ISO527-2	6.6 %
Nominal tensile fracture strain	ISO527-2	120 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO179	NoBreak

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		IEC60093	6E+15 ohms
Volume resistivity		IEC60093	3E+16 ohms·cm
dielectric strength		IEC60243-1	31 KV/mm
dielectric strength	dielectric strength		IEC60243-1	18 KV/mm
Relative Permittivity		IEC60250	3.10
Relative Permittivity	Relative Permittivity		IEC60250	3.10
Dissipation Factor		IEC60250	6E-04
Dissipation Factor	Dissipation Factor		IEC60250	9E-03
Compared to the Leakage Tracking Index (CTI)		UL746	PLC 2

Thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature		ISO75-2/B	138 °C
Heat Deflection Temperature	Heat Deflection Temperature		ISO75-2/A	124 °C
Linear thermal expansion coefficient		ISO11359-2	6.5E-05 cm/cm/°C
Linear thermal expansion coefficient	Linear thermal expansion coefficient		ISO11359-2	6.6E-05 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top