PA6 Razamid® B121 GR30
0
- Properties:Fillerglass fiber reinforced material30%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTMD955 | 0.80 % | |
| Water absorption rate | Saturation | ASTMD570 | 0.10 % |
| density | ASTMD792 | 1.36 g/cm³ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTMD638 | 175 MPa |
| elongation | Break | ASTMD638 | 4.0 % |
| Flexural modulus | ASTMD790 | 8600 MPa | |
| bending strength | ASTMD790 | 110 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 11 J/m | |
| ASTMD256 | 15 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC60093 | 1E+12 ohms | |
| Volume resistivity | IEC60093 | 1E+13 ohms·cm | |
| dielectric strength | ASTMD149 | 22 kV/mm | |
| dielectric constant | ASTMD150 | 3.80 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 205 °C | ||
| ASTMD648 | 215 °C | ||
| vicat | ASTMD1525 | 200 °C | |
| ASTMD3418 | 220 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top