Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.68 g/cm³ |
| Water absorption rate | | ASTM D570 | 0.010 % |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| gloss | | ASTM D2457 | 80 |
| Haze ratio | | ASTM D1003 | 2.0 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Limiting Oxygen Index | | ASTM D2863 | 60 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| coefficient of friction | Itself - Static | ASTM D1894 | 0.075 |
| film | Test Condition | Test Method | Test Result |
|---|
| Secant modulus | | ASTM D882 | 1520 MPa |
| elongation | | ASTM D882 | 200 % |
| Secant modulus | | ASTM D882 | 1380 MPa |
| tensile strength | | ASTM D882 | 34.5 MPa |
| tensile strength | | ASTM D882 | 31.0 MPa |
| tensile strength | | ASTM D882 | 55.2 MPa |
| tensile strength | | ASTM D882 | 48.3 MPa |
| film thickness | | | 25 µm |
| elongation | | ASTM D882 | 250 % |
| Elmendorf tear strength | | ASTM D1922 | 1200 g |
| Water Vapor Transmission Rate | | ASTME96 | 7.8 g/m²/24hr |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 1E+16 ohms·cm |
| dielectric strength | | ASTM D149 | 220 kV/mm |
| dielectric constant | | ASTM D150 | 2.59 |
| Dissipation Factor | | ASTM D150 | 5E-03 |
| Dissipation Factor | | ASTM D150 | 7.7E-03 |
| dielectric constant | | ASTM D150 | 2.56 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Continuous use temperature | | ASTM D794 | 149to171 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare