PA12 9048T1 UBE JAPAN

Form：Granules | Grade：Injection grade

Properties:

High rigiditywear resistantHigh temperature resistan

Typical Applications:

PA pipeAutomotive External PartsAutomotive interior parts

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	PA pipe \| Automotive External Parts \| Automotive interior parts
Properties:	High rigidity \| wear resistant \| High temperature resistan

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Elongation at Break		ASTM D412/ISO 527	＞400	%
Tensile modulus		ASTM D412/ISO 527	136	kg/cm²(MPa)[Lb/in²]
tensile strength		ASTM D412/ISO 527	10	kg/cm²(MPa)[Lb/in²]
Rockwell hardness		ASTM D785	55
Bending modulus		ASTM D412/ISO 527	123	kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	7	kg/cm²(MPa)[Lb/in²]
bending strength	bending strength	湿	ISO 178	7	Mpa
Bending modulus	干	ISO 178	123	Mpa
Bending modulus	Bending modulus	湿	ISO 178	126	Mpa
Charpy Notched Impact Strength	23℃	ISO 179/1eA	NB	KJ/m
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-40℃	ISO 179/1eA	15	KJ/m
Shore hardness	干	ISO 868	55	D
Shore hardness	Shore hardness	湿	ISO 868	48	D
tensile strength	Yield	ISO 527-1/-2	10	Mpa
elongation at yield		ISO 527-1/-2	35	%
Elongation at Break		ISO 527-1/-2	＞25	Mpa
elongation	Break	ISO 527-1/-2	＞400	%
Tensile modulus	干	ISO 178	136	Mpa
Tensile modulus	Tensile modulus	湿	ISO 178	126	Mpa
bending strength	干	ISO 178	7	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ASTM D648/ISO 75	60	℃（℉）
Melting temperature			146	℃（℉）
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	1.9	mm/mm.℃
Hot deformation temperature	0.45Mpa	ISO 75-2	60	°C
Linear coefficient of thermal expansion		ISO 11359-2	1.9
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 1183	1.02	kg·cm/cm(J/M)ft·lb/in
Shrinkage rate		ASTM D955	-0.3/0.9	%
Shrinkage rate	Shrinkage rate	3.0mmt	ISO 294-4	-0.3/0.9	%
Water absorption rate		ISO 62	3.0	%
Melting temperature		ISO 11357-3	146	°C
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257/IEC 60093	1011	Ω.cm
Volume resistivity	Volume resistivity		IEC 60093	10	Ω.cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top