PP STATEX® 31
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 0.988 g/cm³ | |
| Water absorption rate | Saturation | ASTMD570 | 0.010 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Limiting Oxygen Index | ASTMD2863 | 28 % | |
| UL flame retardant rating | UL94 | V-0 |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Film thickness - tested | 690到890 µm | ||
| tensile strength | ASTMD882 | 33.1 MPa | |
| ASTMD882 | 24.8 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTMD257 | 1.0E+10到1.0E+12 ohms | |
| Volume resistivity | ASTMD257 | 1.5E+17 ohms·cm | |
| Hot wire ignition (HWI) | UL746 | 21 sec | |
| DielectricBreakdown | ASTMD149 | 37200 V | |
| StaticDecay | ASTMD257 | <2.0 sec | |
| dielectric strength | ASTMD149 | 47 kV/mm | |
| dielectric constant | ASTMD150 | 2.30 | |
| Dissipation Factor | ASTMD150 | 9E-04 | |
| Compared to the Leakage Tracking Index (CTI) | ASTMD3638 | 600 V | |
| High arc combustion index (HAI) | UL746 | 195 | |
| High Voltage Arc Traceability Rate (HVTR) | UL746 | 0.00 mm/min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 106 °C | ||
| RTI Elec | UL746 | 110 °C | |
| RTI | UL746 | 110 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top