
POM MR90B CELANESE USA
145
Form:Granules
Properties:
Middle flowDielectric resistanceBleach resistant agent
Typical Applications:
Outdoor applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Outdoor applications |
| Properties: | Middle flow | Dielectric resistance | Bleach resistant agent |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 110 | kJ/m² |
| -30°C | ISO 179/1eU | 110 | kJ/m² | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | ISO 527-2/1A/1 | 2800 | Mpa | |
| Bending modulus | 23°C | ISO 178 | 2800 | Mpa |
| Tensile strain | Yield | ISO 527-2/1A/50 | 11 | % |
| tensile strength | Yield | ISO 527-2/1A/50 | 65.0 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 1E-04 | cm/cm/°C |
| MD | ISO 11359-2 | 8.9E-05 | cm/cm/°C | |
| Melting temperature | ISO 11357-3 | 166 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 100 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD | ISO 294-4 | 2.2 | % |
| TD | ISO 294-4 | 2.2 | % | |
| Melt Volume Flow Rate (MVR) | 190°C/2.16kg | ISO 1133 | 8.00 | cm3/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.