
ABS A 6000 NERO SO.F.TER ITALY
Typical Applications:
Applications in the automotive field automotive dashboard
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Applications in the automotive field | automotive dashboard |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | -30°C | ASTM D256 | 198 | J/m |
| 23°C | ASTM D256 | 502 | J/m | |
| tensile strength | 23°C | ASTM D638 | 50 | MPa |
| Bending modulus | 23°C | ASTM D790 | 2305 | MPa |
| Elongation at Break | 23°C | ASTM D638 | 50 | % |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | ASTM1525 | 120 | °C | |
| Hot deformation temperature | 1.80MPaUnannealed | ASTM D648 | 100 | °C |
| Vicat softening temperature | 球压测试 | IEC 335 | Pass | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 260℃/5.0Kg | ASTM D1238 | 14 | g/10min |
| Water absorption rate | (23°C,24hr) | ASTM D570 | 0.10 | % |
| Shrinkage rate | MD | ASTM D995 | 0.55 | % |
| density | ASTM D792 | 1.13 | g/cm³ | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dissipation factor | 相对漏电起痕指数 | ASTM D3638 | 300 | V |
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| Ignition temperature of heating wire | - | IEC 60695-2-12 | 650 | °C |
| Extreme Oxygen Index | ASTM2863 | 22 | % | |
| UL flame retardant rating | UL -94 | HB | 3.20mm | |
| UL -94 | HB | 1.60mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.