ABS Novodur® HH-106 INEOS STYRO KOREA
32
- Properties:heat-resisting
- Usages:Automotive interior partsElectronic fieldApplication in the automotive field
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTMD1238 | 7.0 g/10min | |
| Melt volume flow rate | ISO1133 | 7.00 cm3/10min | |
| Shrinkage rate | ASTMD955 | 0.55 % | |
| ISO294-4 | 0.40to0.70 % | ||
| Water absorption rate | ISO62 | 0.25 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO179 | 100 kJ/m² | |
| ISO179 | 190 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO2039-1 | 102 Mpa | ||
| Tensile modulus | ASTMD638 | 2500 Mpa | |
| ISO527-2 | 2400 Mpa | ||
| tensile strength | ASTMD638 | 52.0 Mpa | |
| Tensile stress | ISO527-2 | 51.0 Mpa | |
| Tensile strain | ISO527-2 | 3.0 % | |
| elongation | ASTMD638 | 3.0 % | |
| Nominal tensile fracture strain | ISO527-2 | 9.0 % | |
| Flexural modulus | ASTMD790 | 2400 Mpa | |
| ISO178 | 2400 Mpa | ||
| bending strength | ASTMD790 | 77.2 Mpa | |
| Bending stress | ISO178 | 72.0 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTMD257 | >1.0E+15 ohms·cm | |
| IEC60093 | 1E+15 ohms·cm | ||
| Electrical strength | IEC60243-1 | 39 KV/mm | |
| CTI | IEC60112 | 600 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO11359-2 | 9E-05 cm/cm/°C | ||
| thermal conductivity | DIN52612 | 0.17 W/m/K | |
| maximum service temperature | 85 °C | ||
| ISO75-2/B | 107 °C | ||
| ISO75-2/A | 99.0 °C | ||
| vicat | ISO306/A50 | 115 °C | |
| ISO306/B50 | 106 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top