PA12 Grilamid® L 25 H EMS-GRIVORY
0
- Properties:Thermal performance
- Usages:Applications in the automotive fieldwire and cable applicationspneumatic applicationspipe fittingsindustrial applicationselectrical and electronic applicationshydraulic applicationsand consumer goods applications
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Continuous use temperature | °C | 100to120 -- | |
| °C | 150 -- | ||
| melting temperature | °C | 178 -- | |
| Charpy Notched Impact Strength | kJ/m² | 8.0 10 | |
| Impact strength of simply supported beam without notch | 无断裂 | ||
| 无断裂 | |||
| Heat distortion temperature | °C | 115 -- | |
| °C | 45.0 -- | ||
| Linear coefficient of thermal expansion | cm/cm/°C | 1.2E-04 -- | |
| cm/cm/°C | 1.4E-04 -- | ||
| Surface Resistivity | ohms | -- 1E+12 | |
| Water absorption rate | % | 1.5 -- | |
| % | 0.70 -- | ||
| Volume resistivity | ohms·cm | -- 1E+13 | |
| dielectric strength | kV/mm | 32 -- | |
| Compared to the Leakage Tracking Index (CTI) | V | -- | |
| tensile strength | Break | MPa | 50.0 50.0 |
| Tensile strain | Yield | % | 5.0 12 |
| Nominal tensile fracture strain | % | >50 >50 | |
| Charpy Notched Impact Strength | kJ/m² | 6.0 7.0 | |
| density | g/cm³ | 1.01 -- | |
| Shore hardness | 70 -- | ||
| ball-indentation hardness | MPa | 70.0 -- | |
| Tensile modulus | MPa | 1600 1100 | |
| Flammability level | HB -- | ||
| tensile strength | Yield | MPa | 50.0 40.0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top