PP PPH-XD-075-1 Jinling Petrochemical
0
- Usages:Blow moldinginjection moldingmodified plastic spinning
CompareTechnical Data Sheet
| Biochemical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ash content | 250 mg/kg | ||
| Chlorine content | 100 % | ||
| Volatile compounds | 0.20 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 6.1-8.1 g/10min | ||
| isotactic index | 96.0 % | ||
| density | 0.41 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | 31.5 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Recommended processing temperature | 180-240 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top