PC SC-1220R Samsung Cheil South Korea

121

Form：Granules | Grade：Injection grade

Properties:

currencyHigh mobilityLow viscosityLow viscosityHigh liquidityFor general injection mol

Typical Applications:

Electric wireCableElectrical fieldElectronic fieldAutomotive sectorIndustrial applicationsAutomotive interior partsAutomotive External PartsIndustrial componentsUsed for industrial accessoriesAutomotive partsElectronic and electrical accessories

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electric wire \| Cable \| Electrical field \| Electronic field \| Automotive sector \| Industrial applications \| Automotive interior parts \| Automotive External Parts \| Industrial components \| Used for industrial accessories \| Automotive parts \| Electronic and electrical accessories
Properties:	currency \| High mobility \| Low viscosity \| Low viscosity \| High liquidity \| For general injection mol

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness		ASTM D785	77	M
Impact strength of cantilever beam gap	1/8	ASTM D256	80	Kgf.cm/cm
Bending modulus		ASTM D790	24000	Kgf/cm2
bending strength		ASTM D790	920	Kgf/cm2
elongation	Break	ASTM D638	90	%
tensile strength	Yield	ASTM D638	630	Kgf/cm2
thermal performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-2
Vicat softening temperature		ASTM D1525	149	°C
Hot deformation temperature	1.8Mpa	ASTM D648	125	°C
Hot deformation temperature	Hot deformation temperature	0.45Mpa	ASTM D648	136	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ASTM D955	0.5-0.7	%
Water absorption rate		ASTM D 570	0.20	%
melt mass-flow rate	300℃,1.2kg	ASTM D1238	22	g/10min
density		ASTM D792	1.20

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top