PP RP346R
0
- Properties:injection molding
- Usages:Daily productshigh-definition containersfood containersthin-walled forming
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 25 g/10min | |
| density | ISO 1183 | 0.9 g/cm3 |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Haze ratio | ASTM D-1003 | 14 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 25 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation at yield | ISO R527 | 14 % | |
| tensile strength | ISO R527 | 30 MPa | |
| Flexural modulus | ISO 179 | 1100 MPa | |
| Impact strength of cantilever beam gap | ISO 180/1A | 8 Kj/m2 | |
| Rockwell hardness | ASTM D-785 | 80 R scale | |
| elongation at yield | ISO 527 | 13 % | |
| tensile strength | ISO 527 | 37 MPa | |
| Flexural modulus | ISO 178 | 1050 MPa | |
| Impact strength of cantilever beam gap | ISO 180/1A | 8 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| optical performance | ASTM D-1003 | 13 % | |
| Heat distortion temperature | ISO 75/B | 83 ℃ | |
| ISO 75/B | 85 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top