PC G2F23R BK223 DSM USA

Form：Granules | Grade：Injection grade

Properties:

injection molding 10% glass fiber reinforceFlame retardant gradeheat-resisting

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

injection molding | 10% glass fiber reinforce | Flame retardant grade | heat-resisting

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index		ISO 4589-1	35	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-1	508000	psi
tensile strength	Yield	ISO 527-1	9430	psi
elongation at yield		ISO 527-1	5.0	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ISO 75-1	297	℉
Vicat softening temperature		ISO 306	302	℉
UL flame retardant rating	1.6mm	ISO 1210	V-0
Melting temperature		ISO 294	572	℉
Mold temperature		ISO 10724	212	℉
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ISO 1133	0.366	Int/10min
Water absorption rate		ISO 62	0.31	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the Leakage Traceability Index (CTI)		IEC 60112	200
Dielectric constant	100Hz	IEC 60250	3.10
Dielectric constant	Dielectric constant	1MHz	IEC 60250	3.00
Dissipation factor	100Hz	IEC 60250	0.0009
Dissipation factor	Dissipation factor	1MHz	IEC 60250	0.009
Volume resistivity		IEC 60093	＞3.9E14	Ω.in
Dielectric strength		IEC 60243-1	740	v/mil

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top