
PBT/ASA A3GF20 A SCHULMAN USA
72
Form:Granules | Grade:Injection grade
Properties:
Low warpageExcellent surface finishFiller: Glass fiber reinf20% filler by weight
Product Description
Certificates(0)
Datasheet
Product Description
| Properties: | Low warpage | Excellent surface finish | Filler: Glass fiber reinf | 20% filler by weight |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 45 | kJ/m² |
| -30°C | ISO 179/1eU | 30 | kJ/m² | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 700 | °C |
| Hot filament ignition temperature | 1.5mm | IEC 60695-2-13 | 725 | °C |
| 3.0mm | IEC 60695-2-13 | 725 | °C | |
| Burning rate | 2.00mm | ISO 3795 | 20 | mm/min |
| Flammability level | 1.5mm | IEC 60695-11-10,-20 | HB | |
| 3.0mm | IEC 60695-11-10,-20 | HB | ||
| Burning wire flammability index | 1.5mm | IEC 60695-2-12 | 700 | °C |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | ISO 527-2/1A/1 | 6500 | Mpa | |
| tensile strength | Break | ISO 527-2/1A/5 | 96.0 | Mpa |
| Tensile strain | Break | ISO 527-2/1A/5 | 2.6 | % |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/Bf | 210 | °C |
| 1.8MPa,Unannealed | ISO 75-2/Af | 172 | °C | |
| Vicat softening temperature | -- | ISO 306/A50 | 205 | °C |
| -- | ISO 306/B50 | 145 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Melt Volume Flow Rate (MVR) | 250°C/2.16kg | ISO 1133 | 20.0 | cm3/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.