PEI ULTEM™ 9075-BK1A151
31
- Properties:Thermal stabilityHigh temperature resistan
- Usages:Automotive ApplicationsElectrical applications
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 2.4 g/10min | |
| Shrinkage rate | 内部方法 | 0.50-0.70 % | |
| 内部方法 | 0.50-0.70 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| FAAFlammability | FAR25.853 | SECTA-1 | |
| OSU total heat release | FAR25.853 | 10.0 kW·min/m² | |
| VerticalBurnTest | FAR25.853 | 1.0 sec | |
| FAR25.853 | 0.0 sec |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 2100 J/m | |
| Dart impact | ASTM D3029 | 35.3 J |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 3310 Mpa | |
| tensile strength | ASTM D638 | 96.5 Mpa | |
| elongation | ASTM D638 | 85 % | |
| Flexural modulus | ASTM D790 | 3240 Mpa | |
| bending strength | ASTM D790 | 145 Mpa | |
| ASTM D790 | 141 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 189 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top