
LLDPE LL 1001KW EXXONMOBIL SINGAPORE
12
Form:Granules | Grade:Thin film grade
Properties:
High transparencyHigh glossResistance to penetration
Typical Applications:
filmchipContractile membraneVegetable and fruit packaging bagsAgricultural filmStretching filmLow waste
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | film | chip | Contractile membrane | Vegetable and fruit packaging bags | Agricultural film | Stretching film | Low waste |
| Properties: | High transparency | High gloss | Resistance to penetration |
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| turbidity | ASTM D-1003 | 9 | % | |
| Opening agent | 3500ppm | |||
| gloss | 60°角 | ASTM D-2457 | 11 | % |
| thermal stability | 有 | |||
| Slippery agent | 1500ppm | |||
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | ASTM D-1238 | 1 | g/10min | |
| density | 埃克森美孚方法 | 0.918 | g/cm³ | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Elongation at Break | Across Flow | ASTM D-882 | 860 | % |
| Dart impact | F50 | ASTM D-1709A | 120 | g |
| Secant modulus | Across Flow,1%Strain | ASTM D-882 | 220 | Mpa |
| Across Flow,1%Strain | ASTM D-882 | 250 | Mpa | |
| tensile strength | Across Flow,Break | ASTM D-882 | 57 | Mpa |
| Across Flow,Break | ASTM D-882 | 38 | Mpa | |
| Elmendorf tear strength | Across Flow | ASTM D-1922 | 120 | g |
| Across Flow | ASTM D-1922 | 480 | g | |
| Elongation at Break | Across Flow | ASTM D-882 | 590 | % |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Melting temperature | 埃克森美孚方法 | 120 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.