
SBS YH-791 SINOPEC BALING
244
Form:Granules | Grade:Injection grade
Properties:
Low temperature resistancWeather resistance
Typical Applications:
Household goodsLabor protection equipmentFootwearadhesiveShoe materialAsphalt modification
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Household goods | Labor protection equipment | Footwear | adhesive | Shoe material | Asphalt modification |
| Properties: | Low temperature resistanc | Weather resistance |
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| ash content | 合格品|≤0.20 | % | ||
| 一等品|≤0.20 | % | |||
| 优等品|≤0.20 | % | |||
| Volatile compounds | 合格品|≤1.00 | % | ||
| 一等品|≤0.70 | % | |||
| 优等品|≤0.50 | % | |||
| Permanent compression deformation | 合格品|≤40 | % | ||
| 一等品|≤30 | % | |||
| 优等品|≤20 | % | |||
| Block ratio | 合格品|30/70 | S/B | ||
| 一等品|30/70 | S/B | |||
| 优等品|30/70 | S/B | |||
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 一等品|1.01-3.00 | g/10min | ||
| 优等品|3.01-5.00 | g/10min | |||
| 合格品|0.50-1.00 | g/10min | |||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | 合格品|≥12.0 | Mpa | ||
| 一等品|≥15.0 | Mpa | |||
| 优等品|≥18.0 | Mpa | |||
| Shore hardness | 合格品|75±7 | |||
| 一等品|75±7 | ||||
| 优等品|75±7 | ||||
| Elongation at Break | 合格品|≥700 | % | ||
| 一等品|≥750 | % | |||
| 优等品|≥815 | % | |||
| Tensile stress | 300%伸长率 | 合格品|≥1.7 | Mpa | |
| 300%伸长率 | 一等品|≥2.0 | Mpa | ||
| 300%伸长率 | 优等品|≥2.5 | Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.